
RG-T0445BVSA-02 — 4.45″ 480x854 IPS TFT LCD Module
Suited to handheld terminals, POS terminals and portable instrument front panels that need a tall 480x854 viewport.
2D CAD mechanical drawing: request it by email
Outline, pin assignment and electrical reference for selection only. Confirm exact pinout, connector and tolerances against the project datasheet. Click the image to enlarge.
| RONEN P/N | RG-T0445BVSA-02 |
|---|---|
| Display Size | 4.45 inch |
| Resolution | 480x854 |
| LCD Type / Shape | IPS |
| Luminance | 350 cd/m² |
| Module Interface | SPI+24BIT RGB |
| LCD Driver IC | ST7701S |
| Touch Option | Without touch |
| Active Area (mm) | 55.44x98.64 |
| Outline Dim. (mm) | 60.00x109.00x2.16 |
| Operating Temp. (°C) | -20 ~ 70 |
| Storage Temp. (°C) | -30 ~ 80 |
Can’t find the exact model you need?
This is a standard model, and our online catalog shows only part of what we build. We hold additional models not listed here, and we can adjust brightness, interface, touch or outline within an existing product family, or evaluate a fully custom solution. If this model does not fully match your requirements, please email your specifications to sales@odmlcd.com. We’ll help you identify the right part or assess a custom option.
Technical overview — what these specifications mean for your design
The table above lists the factory parameters of this module. The notes below explain how each value affects an actual enclosure, firmware and end-product decision, so you can judge fit before requesting a quote.
Panel, resolution and form factor
The panel uses IPS; the native resolution is 480x854.
Active area 55.44 x 98.64 mm sits inside an outline of 60.00 x 109.00 x 2.16 mm — the difference is the bezel, driver area and connector allowance your mechanical drawing must reserve.
Backlight brightness and viewing conditions
Typical luminance is 350 cd/m². That suits indoor products with normal ambient light and semi-outdoor enclosures that avoid direct sun. It is a common specification for meter and instrument panels, and for indoor kiosks with controlled brightness.
The panel is IPS, which keeps colours and viewing angles stable when viewed off-axis — useful where the screen is not directly facing the user.
MCU interface and display driver IC
The module is driven over SPI+24BIT RGB. This is the electrical interface between your MCU and the panel, and it determines pin count, board area and refresh throughput.
Display driver IC: ST7701S. Knowing the driver lets your firmware team pull the correct initialisation sequence and timing parameters.
Touch capability
This configuration is without touch — display only. That suits products where input comes from buttons, a rotary encoder, a keypad or a remote control, and it keeps the module thinner, lower-cost and free of touch-panel calibration work. If your product needs on-screen interaction, ask for the capacitive-touch variant of this size.
Environmental range and storage
Operating temperature is -20 ~ 70 °C — the panel must stay within this range during operation. Consider thermal rise from internal electronics in the enclosure.
Storage range is -30 ~ 80 °C, which matters for shipping and warehousing.
Integration and ordering notes
Sample and production volumes ship from the same bin with no specification change between them. Lead times, order quantities and commercial terms are confirmed in writing per project.
If your project needs something the standard configuration does not cover — a different interface, touch type, brightness or outline — it is worth asking for a custom quotation.
Request a quote & datasheet
Full spec sheet, pricing and lead time for this model — factory-direct, no middleman.
- Supply modelBuilt to order — datasheet & feasibility per project
- Custom optionOutline / AA / interface / touch / brightness tailored
- Full datasheet on RFQOutline drawing, pin definition, contrast, viewing angle — per the agreed project plan
- Lead timeConfirmed with quotation · Factory-direct
- Warranty12 months against manufacturing defects, long-term supply commitment
Frequently asked questions about RG-T0445BVSA-02
How are order quantities and supply terms set for RG-T0445BVSA-02?
RG-T0445BVSA-02 is a standard RONEN module in our standard program, so samples and production volumes ship from the same bin with no specification change between them. Order quantities and commercial terms are confirmed in writing per project — contact sales@odmlcd.com to discuss a supply agreement.
How are supply and delivery schedules confirmed for RG-T0445BVSA-02?
Yes. Sample and production schedules, quantities and commercial terms are confirmed in writing per project. Please contact sales@odmlcd.com for a written confirmation.
Can RG-T0445BVSA-02 be customized?
Yes. FPC outline, connector, backlight brightness, touch panel (resistive or capacitive) and driver-board interface can all be customized. Ask our team for the minimum quantity of your option.
How long will RG-T0445BVSA-02 stay in supply?
RG-T0445BVSA-02 is covered by RONEN's long-term supply commitment: 5+ years of continuous supply as standard, and a pin-compatible successor is proposed if the panel is ever revised.
How do I get the datasheet and a test sample?
Submit the RFQ form on this page — you will receive the specification sheet (PDF) and engineering support, with commercial terms confirmed in writing per project.
Similar Modules in 3 – 5 inch

RG-T035BQSA-01

RG-T035SHI-01

RG-T035BHSA-01
