Kiosk & Self-Service Display Modules — 10.1″ to 21.5″ TFT | RONEN

Ticketing machines, ordering terminals, check-in kiosks and charging cabinets need large-format panels that run all day. RONEN offers 31 TFT modules from 10.1″ to 21.5″ (800x600–1920x1200) with brightness up to 1500 cd/m²; touch-integrated and open-frame variants simplify enclosure design. Long-term supply keeps your kiosk fleet serviceable for a decade.

Lobby, Hall or Charging Cabinet: The Location Sets the Panel

Self-service hardware is specified by where it stands, not by what it does. The same ticket machine needs a different panel in an air-conditioned concourse than against a glazed façade, and a parcel locker outdoors is a different problem again. Three locations cover most of this range:

LocationSizeLuminanceThermal realitySpecification that matters
Indoor lobby, queue area, check-in island10.1″–15.6″400–700 cd/m²Panel heat plus SoC heat in a closed pedestal; internal air 10–15 °C above roomViewing angle for a standing user, and a bezel that survives being leaned on
Semi-outdoor hall, glazed façade, station concourse15.6″–21.5″1000–1500 cd/m²Solar gain through the glass raises the front surface well above ambientReflected-light control (AG/AR) as much as raw nits
Charging cabinet, parcel locker, unattended outdoor unit10.1″–12.1″700–1000 cd/m²No active cooling, wide ambient swing, condensation on cold morningsWide-temperature build and a sealed front that still vents

Open Frame vs Enclosed: What the Mechanical Interface Costs

An open-frame module is a panel, a backlight and a chassis with mounting bosses; the kiosk designer supplies the enclosure and the front glass. It buys depth and cost, and it moves four problems onto the integrator:

Portrait Mounting Changes the Viewing Cone

Most kiosks stand vertically, and that flips the panel’s weak axis into the vertical plane. TN panels in this range are usable in landscape where the horizontal cone is wide and the vertical cone is narrow — but rotate the same part 90° and the narrow cone now runs across a standing user’s eye height, which is exactly the axis that varies most between a 1.55 m and a 1.9 m user.

For any portrait kiosk where the user stands close and looks down, IPS is the default choice: the 25 IPS models in this range cover 10.1″ through 21.5″. Also check the polariser orientation when the panel is rotated — a panel specified for landscape viewing can lose contrast at the top edge in portrait, and sunglasses with polarised lenses will darken the screen at one specific angle whatever the panel does.

1500 cd/m² in a Fanless Box: The Heat You Bought

Brightness is efficiency-limited. A backlight delivering 1500 cd/m² across a 21.5″ area is dissipating several times the power of a 500 cd/m² unit of the same size, and in a sealed pedestal that power has nowhere to go except the air inside the box. The sequence that follows is predictable: internal air rises 10–15 °C above room, the panel’s own temperature limit arrives earlier than the ambient rating suggests, and the backlight derates or the image develops a yellow cast at the edges.

Three practical rules. Size the thermal path for the panel’s dissipation, not the SoC’s. Vent the pedestal at the top and bottom rather than the sides, so convection actually runs. And if the kiosk faces a window, put the anti-glare treatment on the outer glass — it lets you specify 1000 cd/m² instead of 1500 and removes a third of the heat at the same time.

A Ten-Year Fleet Needs a Ten-Year Part

Self-service estates are bought once and serviced for a decade; a kiosk model that is discontinued in year three leaves spares that cannot be sourced. Two questions decide whether a panel can carry that duty: is it a catalog part produced continuously rather than a project build, and does the supplier commit to a pin-compatible successor when the glass changes? Ask both before the first purchase order, and keep the answer in the technical file — it is the difference between a repair and a retrofit programme.

The Range at a Glance

SizeModelsResolutions in this rangePanel / touch variantsWhere it usually goes
10.1″15800×1280, 1024×600, 1280×800, 1920×1200IPS 12 / TN 3Compact kiosk, locker
10.4″3800×600, 1024×768TN 2 / IPS 1Legacy 4:3 replacement
11.6″11920×1080IPS 1Slim portrait kiosk
12.1″5800×600, 1024×768, 1280×800IPS 4 / TN 1Ticket machine, check-in
13.3″11920×1080IPS 1Slim lobby unit
15.0″11024×768IPS 1Standard kiosk
15.6″31920×1080IPS 3Ordering terminal
18.5″11920×1080IPS 1Large-format totem
21.5″11920×1080IPS 1Full-height totem

Standard Modules in This Range

31 standard models in this family

RG-T101BYEA-01ND - 10.1" 800x1280 IPS TFT LCD module

RG-T101BYEA-01ND

10.1"800x1280IPS
RG-T101BAE-01ND - 10.1" 1024x600 TN TFT LCD module

RG-T101BAE-01ND

10.1"1024x600TN
RG-T101BAE-01PD - 10.1" 1024x600 TN RTP TFT LCD module

RG-T101BAE-01PD

10.1"1024x600TN
RG-T101BAH-01 - 10.1" 1024x600 TN TFT LCD module

RG-T101BAH-01

10.1"1024x600TN
RG-T101BAHA-01 - 10.1" 1024x600 IPS TFT LCD module

RG-T101BAHA-01

10.1"1024x600IPS
RG-T101BAHA-02CP - 10.1" 1024x600 IPS CTP TFT LCD module

RG-T101BAHA-02CP

10.1"1024x600IPS
RG-T101BAHA-02ND - 10.1" 1024x600 IPS TFT LCD module

RG-T101BAHA-02ND

10.1"1024x600IPS
RG-T101BIHA-01 - 10.1" 1280x800 IPS TFT LCD module

RG-T101BIHA-01

10.1"1280x800IPS
RG-T101HIEWA-01 - 10.1" 1280x800 IPS TFT LCD module

RG-T101HIEWA-01

10.1"1280x800IPS
RG-T101HIEWA-01CP - 10.1" 1280x800 IPS CTP TFT LCD module

RG-T101HIEWA-01CP

10.1"1280x800IPS
RG-T101HIEWA-03 - 10.1" 1280x800 IPS TFT LCD module

RG-T101HIEWA-03

10.1"1280x800IPS
RG-T101HIEWA-04 - 10.1" 1280x800 IPS TFT LCD module

RG-T101HIEWA-04

10.1"1280x800IPS
RG-T101QIHA-01CA-B - 10.1" 1280x800 IPS CTP TFT LCD module

RG-T101QIHA-01CA-B

10.1"1280x800IPS
RG-T101BFHA-01 - 10.1" 1920x1200 IPS TFT LCD module

RG-T101BFHA-01

10.1"1920x1200IPS
RG-T101BAHA-02CD - 10.1" 1024x600 IPS CTP TFT LCD module

RG-T101BAHA-02CD

10.1"1024x600IPS
RG-T104QGH-01 - 10.4" 800x600 TN TFT LCD module

RG-T104QGH-01

10.4"800x600TN
RG-T104QGH-02 - 10.4" 800x600 TN TFT LCD module

RG-T104QGH-02

10.4"800x600TN
RG-T104QXHA-03 - 10.4" 1024x768 IPS TFT LCD module

RG-T104QXHA-03

10.4"1024x768IPS
RG-T116BFHA-01 - 11.6" 1920x1080 IPS TFT LCD module

RG-T116BFHA-01

11.6"1920x1080IPS
RG-T121QGH-01 - 12.1" 800x600 TN TFT LCD module

RG-T121QGH-01

12.1"800x600TN
RG-T121QXHA-01 - 12.1" 1024x768 IPS TFT LCD module

RG-T121QXHA-01

12.1"1024x768IPS
RG-T121QXHA-02 - 12.1" 1024x768 IPS TFT LCD module

RG-T121QXHA-02

12.1"1024x768IPS
RG-T121QIHA-01 - 12.1" 1280x800 IPS TFT LCD module

RG-T121QIHA-01

12.1"1280x800IPS
RG-T121BIHA-01 - 12.1" 1280x800 IPS TFT LCD module

RG-T121BIHA-01

12.1"1280x800IPS
RG-T133BFHA-02 - 13.3" 1920x1080 IPS TFT LCD module

RG-T133BFHA-02

13.3"1920x1080IPS
RG-T150QXHA-01 - 15.0" 1024x768 IPS TFT LCD module

RG-T150QXHA-01

15.0"1024x768IPS
RG-T156QFHWA-01 - 15.6" 1920x1080 IPS TFT LCD module

RG-T156QFHWA-01

15.6"1920x1080IPS
RG-T156BFHWA-02 - 15.6" 1920x1080 IPS TFT LCD module

RG-T156BFHWA-02

15.6"1920x1080IPS
RG-T156BFHWA-02CP - 15.6" 1920x1080 IPS CTP TFT LCD module

RG-T156BFHWA-02CP

15.6"1920x1080IPS
RG-T185BFHWA-02 - 18.5" 1920x1080 IPS TFT LCD module

RG-T185BFHWA-02

18.5"1920x1080IPS
RG-T215BFHA-02 - 21.5" 1920x1080 IPS TFT LCD module

RG-T215BFHA-02

21.5"1920x1080IPS

Back to All 190+ Models

Can’t find the exact model you need?

This is a standard model, and our online catalog shows only part of what we build. We hold additional models not listed here, and we can adjust brightness, interface, touch or outline within an existing product family, or evaluate a fully custom solution. If this model does not fully match your requirements, please email your specifications to sales@odmlcd.com. We’ll help you identify the right part or assess a custom option.

FAQ

Do you reliably cover the full small-to-large TFT size range?

Yes. RONEN's standard catalog lists 190+ TFT LCD models from 0.96 to 21.5 inch, spanning IPS, TN, round, bar and square form factors. The range is produced continuously rather than project-by-project, so steady supply is the default, not the exception.

Total capacity: 35,308,420 pcs/year (LCD + CTP combined) (LCD + CTP combined) from our own line — enough headroom to hold both volume and lead-time commitments across the full size range.

See the full list on the products page, or jump to small TFT / industrial TFT.

Are they durable and high quality?

Cover-glass options reach 7H on the Mohs scale (≈9H by pencil-hardness test), and modules are built for industrial duty: 1.5 m drop test / IK08 impact rating on the covered versions. Every unit passes incoming and outgoing inspection against the spec sheet.

How large is your production capacity?

RONEN runs its own factory in Guangdong (Guangdong) with 23,700 m² floor area and an annual capacity of 35,308,420 pcs/year (LCD + CTP combined). This owned capacity is what lets us hold both volume and lead-time commitments.

Can I get a kiosk panel with the touch already bonded?

Yes — the touch-integrated variants in this range ship with the sensor laminated to the panel, so the integrator only adds the front glass. Bonding the front glass as well is an ODM step: send the glass drawing and the enclosure section and the stack can be quoted as one assembly, which is usually cheaper than buying panel and glass separately and bonding in-house at low volume.

Do you supply open-frame versions?

Several models in this range are available as open-frame assemblies with rear mounting bosses and no bezel. The exact frame drawing differs per size, so the practical route is to name the panel part number and the enclosure depth, and we confirm which frame variant fits without changing the active area position.

What brightness do I need for a kiosk behind glass?

Treat the glass as a reflector first. A glazed façade at 60,000–100,000 lux reflects enough light off a 4 mm glass to add 300–1500 cd/m² to the black level, so 1000 cd/m² behind untreated glass can look worse than 700 cd/m² behind an anti-reflective coated one. Specify the coating and the brightness together; either alone is guesswork.

Is a wide-temperature panel necessary indoors?

Not for the ambient air, but often for the panel. Inside a sealed pedestal the display’s own backlight can push local temperature 10–15 °C above the room, and a unit standing near a window or a heating vent adds more. A wide-temperature build raises the upper limit and, more importantly, keeps the backlight from derating on the hottest afternoon of the year.

How do you handle spares for a kiosk fleet?

Keep the panel part number and its revision in the service documentation, and ask for a written end-of-life notice period at purchase. Catalog parts are produced continuously rather than in one batch, which is what makes a five-year spare plan realistic; where glass changes, the successor is chosen to keep the mechanical outline and interface so the enclosure does not need redesign.