Find a TFT LCD by Size and Resolution

2018-09-24 · 6 min read

Quick Answer

When the original part number is unknown or unprintable, reverse lookup works: measure size and active area, read resolution from the test pattern or host config, identify the interface from the connector, then match against a catalog. Our catalog covers 190+ standard modules — 128 RGB, 27 LVDS, 20 MIPI and 5 SPI — across the sizes tabulated below. Send us the three parameters and we return matching part numbers with datasheets.

Two sizes now have dedicated main pages with the full model list and verified specifications: 8.0 inch TFT LCD modules (800x600, 1024x768 and 800x1280 portrait, 250–1200 cd/m²) and 15.0 inch TFT LCD modules (1024x768 IPS, LVDS, 450 cd/m²).

“Most “drop-in replacement” claims quietly break at the pin level. The fastest way to a real cross-reference is the old part number plus the failure you observed.”

Step 1 — Measure size and active area

Diagonal size in inches, plus the active area in millimetres from the datasheet or a ruler on the sample. Two panels can share a diagonal yet differ in active area — this is the first disambiguator.

Step 2 — Read the resolution

From the host configuration, a test pattern, or the driver IC datasheet. If unknown, a photo of the connector and a note of the host SoC usually lets us infer it.

Step 3 — Identify the interface

Count conductors and look at the connector: wide flexible PCBs with many lines suggest RGB or LVDS; shielded pairs suggest LVDS; few lines suggest SPI or MCU. Our catalog split is 128 RGB / 27 LVDS / 20 MIPI / 5 SPI across 190+ modules, so the interface alone roughly quarters the search space.

Catalog coverage by size

190+ standard modules across these diagonals:

SizeModules
0.96"1
0.99"1
1.3"2
1.54"1
1.77"2
2.0"2
2.1"1
2.3"1
2.4"1
2.7"1
2.76"1
2.8"4
2.95"2
3.0"1
3.1"1
3.4"1
3.45"1
3.5"23
3.66"1
3.9"1
3.97"4
3.99"1
4.0"3
4.3"26
4.6"1
5.0"22
5.65"4
5.7"2
6.8"1
7.0"40
7.8"1
8.0"7
8.4"1
10.1"15
10.4"3
11.6"1
12.1"5
13.3"1
15.0"1
15.6"3
18.5"1
21.5"1

Send three numbers, get part numbers back

Size, resolution, interface — that is all we need to shortlist candidates with datasheets. Pinout, timing and backlight verification then follows the standard 5-step checklist.

Frequently asked questions

I only know the size. Can you still help?

Yes — a photo of the connector and the host board narrows the interface and resolution quickly. Samples make it exact.

Is the size table complete?

It reflects the current standard catalog; custom sizes outside the table are possible on request through our ODM route.

Related pages

TFT LCD Drop-in Replacement Guide

Replacement hub · RONEN DISPLAY

5-step verification checklist

Process · RONEN DISPLAY

7-inch replacement guide

Category · RONEN DISPLAY

Need help specifying a display?

Send us your size, resolution, brightness, interface and operating temperature — our application engineers will come back with matching standard modules or a standard proposal once the project scope is confirmed. Request a quote →

Share this guide
LinkedInXRedditFacebookTelegramThreadsHacker NewsEmail

How these numbers are measured

These are generic test-method standards cited to explain how each specification is defined and measured. They are not product certifications. The actual test conditions and rated values for each RONEN model are stated in that model's datasheet.