
RG-T123FH-B50L — 12.3″ 1920x720 Bar TFT Display Module
Stretched bar-format module for information strips, shelf-edge labels and instrument panels.
2D CAD mechanical drawing: request it by email
Outline, pin assignment and electrical reference for selection only. Confirm exact pinout, connector and tolerances against the project datasheet. Click the image to enlarge.
| Display Size | 12.3 inch |
|---|---|
| Resolution | 1920x720 |
| LCD Type / Shape | Bar TFT LCD |
| Luminance | 800–850 cd/m² |
| Module Interface | 2-ch LVDS |
| LCD Driver IC | Confirm per project |
| Touch Option | Without touch |
| Active Area (mm) | 292.032x109.512 |
| Module Outline (mm) | 308.1x130.0x7.6 |
| Operating Temp. (°C) | -30~85 °C |
Can’t find the exact model you need?
This is a standard model, and our online catalog shows only part of what we build. We hold additional models not listed here, and we can adjust brightness, interface, touch or outline within an existing product family, or evaluate a fully custom solution. If this model does not fully match your requirements, please email your specifications to sales@odmlcd.com. We’ll help you identify the right part or assess a custom option.
Technical overview — what these specifications mean for your design
The table above lists the factory parameters of this module. The notes below explain how each value affects an actual enclosure, firmware and end-product decision, so you can judge fit before requesting a quote.
Panel, resolution and form factor
The panel measures 12.3 inch on the diagonal with a native resolution of 1920x720. That combination fixes the pixel pitch, the viewing area and the mechanical envelope before you start the enclosure design.
Active area is 292.032 × 109.512 mm and the module outline is 308.1 × 130.0 × 7.6 mm (W×H×D). The difference between the two is the bezel, driver area and connector allowance your mechanical drawing must reserve.
This configuration is listed in the wide-temperature family, which suits outdoor kiosks, transport equipment and unheated enclosures.
Backlight brightness and viewing conditions
Typical backlight luminance is 800–850 cd/m². Tell us the ambient light level of the installation if you need a different backlight.
Viewing angles are confirmed per project for this configuration — specify how the panel is mounted and whether it is read off-axis, and we will confirm the stated viewing specification.
Interface and display driver IC
The module interface is 2-ch LVDS. Interface options within this product family include MIPI DSI, LVDS and parallel RGB — tell us if your host controller needs a different one.
The display driver IC for this configuration is confirmed per project. If you already have a panel bring-up in progress, send us the target controller and we will confirm the driver before sampling.
Touch capability
This configuration is without touch — display only. That suits products where input comes from buttons, a rotary encoder, a keypad or a remote control, and it keeps the module thinner, lower-cost and free of touch-panel calibration work. If your product needs on-screen interaction, ask for the capacitive-touch variant.
Environmental range and storage
The operating temperature range is -30~85 °C. For outdoor kiosks, transport equipment and unheated enclosures, state the minimum ambient temperature you need to cover.
Storage range is confirmed per project as well — it matters for shipping, warehousing and unpowered periods, particularly for products shipped through hot climates or stored in containers.
Integration and ordering notes
Every model in this series is held in our standard program, so samples and production volumes ship from the same bin and the specification does not change between them. Lead times, order quantities and commercial terms are confirmed in writing per project.
If your project needs something the standard configuration does not cover — a different interface, touch type, brightness range, backlight life or outline dimension — it is worth asking for a custom quotation. Adjusting an interface or outline within an existing family is usually far cheaper and faster than starting a new module from scratch, and the factory-direct route means you deal with the manufacturer rather than a trading company.
Request a quote & specification
Full spec sheet, pricing and lead time for this model — factory-direct, no middleman.
- Supply modelBuilt to order — datasheet & feasibility per project
- Custom optionOutline / AA / interface / touch / brightness tailored
- Full datasheet on RFQOutline drawing, pin definition, contrast, viewing angle — per the agreed project plan
- Lead timeConfirmed with quotation · Factory-direct
- Warranty12 months against manufacturing defects, long-term supply commitment
Frequently asked questions about RG-T123FH-B50L
How are order quantities and supply terms set for RG-T123FH-B50L?
RG-T123FH-B50L is a standard RONEN module in our standard program, so samples and production volumes ship from the same bin with no specification change between them. Order quantities and commercial terms are confirmed in writing per project — contact sales@odmlcd.com to discuss a supply agreement.
Can RG-T123FH-B50L be customized?
Yes. Interface, backlight brightness, touch option (resistive or capacitive), cover glass and outline dimension can all be adjusted within this product family. Ask our team for the minimum quantity of your option.
How long will RG-T123FH-B50L stay in supply?
RG-T123FH-B50L is covered by RONEN's long-term supply commitment: 5+ years of continuous supply as standard, and a pin-compatible successor is proposed if the panel is ever revised.
What is the operating temperature range of RG-T123FH-B50L?
Operating temperature is -30~85 °C. Specify enclosure ventilation and account for internal thermal rise from the electronics inside the housing.
How do I get the specification and a test sample?
Submit the RFQ form on this page — you will receive the specification sheet and engineering support, with commercial terms confirmed in writing per project.