Disclaimer: All tool outputs are preliminary engineering estimates for reference only. All design parameters must be verified with official datasheets and the ODMLCD engineering team before prototype and mass production. This tool shall not be liable for any direct or indirect design decisions based on estimated results.
工業 LCD 亮度計算器
輸入您的光照環境,計算可讀操作所需的最低顯示器亮度(nits),並取得光學貼合/防眩建議。基於顯示工程師常用的 2:1 對比法則。
計算所需亮度
選擇使用環境,或直接輸入環境 lux。
Estimated result only — please confirm with our engineers for final design.
亮度速查表
| 環境 | 建議值 |
|---|---|
| 室內 | 250 nits |
| 半戶外 | 500 nits |
| 戶外陰影處 | 700–1000 nits |
| 直射陽光 | 1000–2000 nits + 光學貼合 + AR |
FAQ
為什麼陽光下要 1000 nits?
在 100,000 lux 下,2:1 法則意味著 50,000 nits——LCD 做不到。光學貼合與抗反射鍍膜可削減約 90% 的反射眩光,使 1000 nits 在戶外實際可讀。
高亮度會縮短壽命嗎?
會。1000+ nits 背光工作溫度更高,典型壽命 20,000–30,000 小時(標準款為 50,000)。散熱設計至關重要。
何時應該使用亮度計算器?
請在機殼與電源設計的早期階段使用:輸入您的環境照明條件,了解可讀顯示所需的最低尼特,以及光學貼合或抗眩光處理是否值得。