P0700WVF1MA00 Alternative Source — Engineering Cross-Reference

2026-11-12 · RONEN Display Engineering
Looking for verified specifications or an engineering reference for P0700WVF1MA00? This page documents the published Tianma module parameters and the RONEN engineering review route. This page does not assert that a verified drop-in replacement exists.

P0700WVF1MA00 published parameters — engineering reference

The table documents the published module parameters. Any RONEN module of the same size and resolution is shown for engineering reference only, not as a verified replacement. Fields that depend on the original manufacturer's datasheet are referred to that document rather than restated as a value we have not issued.

Verification status: A 100%-compatible, drop-in replacement has not been verified for this part number. The specification table below documents the original module parameters for engineering reference only. Interface, connector pin assignment, mechanical outline, backlight drive and timing must be confirmed by RONEN engineering against your existing design before any module is proposed.

ParameterTianma standard moduleRONEN engineering reference (not verified)
Part numberP0700WVF1MA00No verified replacement (see status above)
Display size7.0 inch7.0 inch
Resolution800x480800x480
Luminance1500 cd/m2300 cd/m²
Operating temperature-30 ~ 80 °C-20 ~ 55
InterfaceLVDS (1 ch, 6/8-bit), 20 pinsRGB 24bit 50PIN Short FPC
Active area152.4 × 91.44 mm153.84x85.63
Outline169.8 × 109.7 × 10.87 mm164.90x100.00x5.60
Panel modeOriginal specificationTN
Driver ICRM53350_3112 + RM57750_3110EK9716DB4
TouchOriginal specification; touch is a project option on the RONEN sideWithout touch / capacitive or resistive available per project

Engineering checks before considering RG-T070BWE-14ND

For a 7″ 800x480 module, the evaluation covers the active area, interface family, luminance, panel mode and mechanical outline. Connector pin assignment, backlight drive conditions and timing are reviewed against your existing design by RONEN engineering. Capacitive or resistive touch can be specified as part of the ODM/OEM build.

Other Tianma part numbers mapped to this size class are listed in the Tianma cross-reference index, or use the alternative source finder to search by part number.

Request an engineering fit review

Send the original part number P0700WVF1MA00, your interface requirement and the target mechanical envelope. RONEN engineering reviews the electrical and mechanical fit per project and confirms whether a usable module exists before any order is placed.

Contact RONEN engineering → · Reference RG-T070BWE-14ND specifications (reference only) →

This is a documented engineering cross-reference. Interchangeability is not asserted, and no 100%-compatible replacement has been verified for this part number. Any module proposal requires per-project engineering review.

How these numbers are measured

These are generic test-method standards cited to explain how each specification is defined and measured. They are not product certifications. The actual test conditions and rated values for each RONEN model are stated in that model's datasheet.