G085VW01-V3 Alternative Source — Engineering Cross-Reference

2026-11-12 · RONEN Display Engineering
Looking for verified specifications or an engineering reference for G085VW01-V3? This page documents the published AU Optronics (AUO) module parameters and the RONEN engineering review route. This page does not assert that a verified drop-in replacement exists.

G085VW01-V3 — published parameters

We do not have a published RONEN module that matches the exact display size and resolution of G085VW01-V3. The values below are the parameters published in the AU Optronics (AUO) distribution listing; interface, active area and outline are referred to the original manufacturer datasheet.

Verification status: A 100%-compatible, drop-in replacement has not been verified for this part number. The specification table below documents the original module parameters for engineering reference only. Interface, connector pin assignment, mechanical outline, backlight drive and timing must be confirmed by RONEN engineering against your existing design before any module is proposed.

ParameterAU Optronics (AUO) standard module
Part numberG085VW01-V3
Display size8.5 inch
Resolution800x480
Luminance200cd/㎡
Operating temperature-20-70(℃)
InterfaceCMOS (1 ch, 6-bit), 40 pins
Active area184.8 × 110.88 mm
Outline210 × 134 × 10.5 mm
Driver ICNot disclosed by manufacturer

Modules for engineering evaluation only

The RONEN modules below are the closest by physical size in our 197-model catalogue. They are listed for evaluation only and are not a published correspondence to this part number. An ODM/OEM build may be proposed once the original drawing and electrical requirements are reviewed.

See the AU Optronics (AUO) cross-reference index for other part numbers.

Request an engineering fit review

Send the original part number G085VW01-V3, your interface requirement and the target mechanical envelope. RONEN engineering reviews the electrical and mechanical fit per project and confirms whether a usable module exists before any order is placed.

Request an engineering evaluation → · Search by part number →

This is a documented engineering cross-reference. Interchangeability is not asserted, and no 100%-compatible replacement has been verified for this part number. Any module proposal requires per-project engineering review.

How these numbers are measured

These are generic test-method standards cited to explain how each specification is defined and measured. They are not product certifications. The actual test conditions and rated values for each RONEN model are stated in that model's datasheet.