G084XAN010 Alternative Source — Engineering Cross-Reference

2026-11-12 · RONEN Display Engineering
Looking for verified specifications or an engineering reference for G084XAN010? This page documents the published AU Optronics (AUO) module parameters and the RONEN engineering review route. This page does not assert that a verified drop-in replacement exists.

G084XAN010 published parameters — engineering reference

The table documents the published module parameters. Any RONEN module of the same size and resolution is shown for engineering reference only, not as a verified replacement. Fields that depend on the original manufacturer's datasheet are referred to that document rather than restated as a value we have not issued.

Verification status: A 100%-compatible, drop-in replacement has not been verified for this part number. The specification table below documents the original module parameters for engineering reference only. Interface, connector pin assignment, mechanical outline, backlight drive and timing must be confirmed by RONEN engineering against your existing design before any module is proposed.

ParameterAU Optronics (AUO) standard moduleRONEN engineering reference (not verified)
Part numberG084XAN010No verified replacement (see status above)
Display size8.4 inch8.4 inch
Resolution1024x7681024x768
Luminance700cd/㎡500 cd/m²
Operating temperature-30 ~ 80 °C-30 ~ 80
InterfaceLVDS/1ch/6-8-bit/40 pinsLVDS
Active area170.496 × 127.872 mm170.496x127.872
Outline199.5 × 149 × 9.55 mm199.5x149.0x9.60
Panel modeOriginal specificationTN
Driver ICNot disclosed by manufacturerJD9168S
TouchOriginal specification; touch is a project option on the RONEN sideWithout touch / capacitive or resistive available per project

Engineering checks before considering RG-T084BXJWA-01

For an 8.4″ 1024x768 module, the evaluation covers the active area, interface family, luminance, panel mode and mechanical outline. Connector pin assignment, backlight drive conditions and timing are reviewed against your existing design by RONEN engineering. Capacitive or resistive touch can be specified as part of the ODM/OEM build.

Other AU Optronics (AUO) part numbers mapped to this size class are listed in the AU Optronics (AUO) cross-reference index, or use the alternative source finder to search by part number.

Request an engineering fit review

Send the original part number G084XAN010, your interface requirement and the target mechanical envelope. RONEN engineering reviews the electrical and mechanical fit per project and confirms whether a usable module exists before any order is placed.

Contact RONEN engineering → · Reference RG-T084BXJWA-01 specifications (reference only) →

This is a documented engineering cross-reference. Interchangeability is not asserted, and no 100%-compatible replacement has been verified for this part number. Any module proposal requires per-project engineering review.

How these numbers are measured

These are generic test-method standards cited to explain how each specification is defined and measured. They are not product certifications. The actual test conditions and rated values for each RONEN model are stated in that model's datasheet.