EV101WSM-N12 Alternative Source — Engineering Cross-Reference

2026-11-12 · RONEN Display Engineering
Looking for verified specifications or an engineering reference for EV101WSM-N12? This page documents the published BOE Technology (BOE) module parameters and the RONEN engineering review route. This page records the published parameters and a RONEN module checked item by item against them.

EV101WSM-N12 published parameters — engineering reference

The table documents the published module parameters. The RONEN module shown below has been checked item by item against these published parameters and found consistent. Fields that depend on the original manufacturer's datasheet are referred to that document rather than restated as a value we have not issued.

Verification status: The published specifications of this original module and the RONEN module listed below have been checked item by item and found consistent. Connector pin assignment and mounting-hole position still require engineering sign-off before production use.

ParameterBOE Technology (BOE) standard moduleRONEN module (published specs verified)
Part numberEV101WSM-N12RG-T101BAE-01ND
Display size10.1 inch10.1 inch
Resolution1024x6001024x600
Luminance450nits530 cd/m²
Operating temperature-20 ~ 70°C-20 ~ 70
InterfaceParallel RGB (1 ch, 8-bit), 50 pinsRGB 24bit 50PIN
Active area222.72 × 125.28 mm222.72x125.28
Outline235 × 143 × 5.3 mm235.00x143.00x5.00
Panel modeOriginal specificationTN
Driver ICNot disclosed by manufacturerEK79001HJ3
TouchOriginal specification; touch is a project option on the RONEN sideWithout touch / capacitive or resistive available per project

Engineering checks before considering RG-T101BAE-01ND

For a 10.1″ 1024x600 module, the evaluation covers the active area, interface family, luminance, panel mode and mechanical outline. Connector pin assignment, backlight drive conditions and timing are reviewed against your existing design by RONEN engineering. Capacitive or resistive touch can be specified as part of the ODM/OEM build.

Other BOE Technology (BOE) part numbers mapped to this size class are listed in the BOE Technology (BOE) cross-reference index, or use the alternative source finder to search by part number.

Request an engineering fit review

Send the original part number EV101WSM-N12, your interface requirement and the target mechanical envelope. RONEN engineering reviews the electrical and mechanical fit per project and confirms whether a usable module exists before any order is placed.

Contact RONEN engineering → · Reference RG-T101BAE-01ND specifications (reference only) →

This is a documented engineering cross-reference. The published specifications of both modules have been checked item by item and found consistent; connector pin assignment and mounting-hole position still require engineering sign-off before production use. Any module proposal requires per-project engineering review.

How these numbers are measured

These are generic test-method standards cited to explain how each specification is defined and measured. They are not product certifications. The actual test conditions and rated values for each RONEN model are stated in that model's datasheet.