BA104S01-200-3HP0 Alternative Source — Engineering Cross-Reference
Looking for verified specifications or an engineering reference for BA104S01-200-3HP0? This page documents
the published BOE Technology (BOE) module parameters and the RONEN engineering review route. This page records the published parameters and a RONEN module checked item by item against them.
BA104S01-200-3HP0 published parameters — engineering reference
The table documents the published module parameters. The RONEN module shown below has been checked item by item against these published parameters and found consistent. Fields that depend on the original manufacturer's datasheet are referred to that document rather than restated as a value we have not issued.
Verification status: The published specifications of this original module and the RONEN module listed below have been checked item by item and found consistent. Connector pin assignment and mounting-hole position still require engineering sign-off before production use.
| Parameter | BOE Technology (BOE) standard module | RONEN module (published specs verified) |
|---|---|---|
| Part number | BA104S01-200-3HP0 | RG-T104QGH-01 |
| Display size | 10.4 inch | 10.4 inch |
| Resolution | 800x600 | 800x600 |
| Luminance | 350nits | 350 cd/m² |
| Operating temperature | -20 ~ 70°C | -20 ~ 70 |
| Interface | LVDS (1 ch, 6/8-bit), 20 pins | LVDS 8bit 20PIN |
| Active area | 211.2 × 158.4 mm | 211.20x158.40 |
| Outline | 236 × 176.9 × 5.9 mm | 236.00x176.90x5.60 |
| Panel mode | Original specification | TN |
| Driver IC | Not disclosed by manufacturer | |
| Touch | Original specification; touch is a project option on the RONEN side | Without touch / capacitive or resistive available per project |
Engineering checks before considering RG-T104QGH-01
For a 10.4″ 800x600 module, the evaluation covers the active area, interface family, luminance, panel mode and mechanical outline. Connector pin assignment, backlight drive conditions and timing are reviewed against your existing design by RONEN engineering. Capacitive or resistive touch can be specified as part of the ODM/OEM build.
Other BOE Technology (BOE) part numbers mapped to this size class are listed in the BOE Technology (BOE) cross-reference index, or use the alternative source finder to search by part number.
Request an engineering fit review
Send the original part number BA104S01-200-3HP0, your interface requirement and the target mechanical envelope. RONEN engineering reviews the electrical and mechanical fit per project and confirms whether a usable module exists before any order is placed.
Contact RONEN engineering → · Reference RG-T104QGH-01 specifications (reference only) →
This is a documented engineering cross-reference. The published specifications of both modules have been checked item by item and found consistent; connector pin assignment and mounting-hole position still require engineering sign-off before production use. Any module proposal requires per-project engineering review.