AV103Z7M-N1C-D8P0 Alternative Source — Engineering Cross-Reference

2026-11-12 · RONEN Display Engineering
Looking for verified specifications or an engineering reference for AV103Z7M-N1C-D8P0? This page documents the published BOE Technology (BOE) module parameters and the RONEN engineering review route. This page does not assert that a verified drop-in replacement exists.

AV103Z7M-N1C-D8P0 — published parameters

We do not have a published RONEN module that matches the exact display size and resolution of AV103Z7M-N1C-D8P0. The values below are the parameters published in the BOE Technology (BOE) distribution listing; interface, active area and outline are referred to the original manufacturer datasheet.

Verification status: A 100%-compatible, drop-in replacement has not been verified for this part number. The specification table below documents the original module parameters for engineering reference only. Interface, connector pin assignment, mechanical outline, backlight drive and timing must be confirmed by RONEN engineering against your existing design before any module is proposed.

ParameterBOE Technology (BOE) standard module
Part numberAV103Z7M-N1C-D8P0
Display size10.3 inch
Resolution1920x720
Luminance900nits
Operating temperature-30 ~ 85°C
InterfaceLVDS (2 ch, 8-bit), 60 pins
Active area243.648 × 91.368 mm
Outline256.75 × 107.18 × 10.8 mm
Driver ICHX8290B-B

Modules for engineering evaluation only

The RONEN modules below are the closest by physical size in our 197-model catalogue. They are listed for evaluation only and are not a published correspondence to this part number. An ODM/OEM build may be proposed once the original drawing and electrical requirements are reviewed.

See the BOE Technology (BOE) cross-reference index for other part numbers.

Request an engineering fit review

Send the original part number AV103Z7M-N1C-D8P0, your interface requirement and the target mechanical envelope. RONEN engineering reviews the electrical and mechanical fit per project and confirms whether a usable module exists before any order is placed.

Request an engineering evaluation → · Search by part number →

This is a documented engineering cross-reference. Interchangeability is not asserted, and no 100%-compatible replacement has been verified for this part number. Any module proposal requires per-project engineering review.

How these numbers are measured

These are generic test-method standards cited to explain how each specification is defined and measured. They are not product certifications. The actual test conditions and rated values for each RONEN model are stated in that model's datasheet.